短须裂腹鱼规模化人工繁育技术研究

2012—2013年,为提高短须裂腹鱼人工繁育能力,以刚涌出的清澈无致病菌和虫的地下泉水为水源,采用水流培育亲鱼、流水孵化受精卵、活体饵料培育鱼苗等关键技术,进行短须裂腹鱼规模化人工繁育技术研究。结果表明:2年共采捕野生短须裂腹鱼亲鱼403尾,在水流速度0.1~0.3 m/s、水温12~16℃、pH值6.5~7.0、溶氧6 mg/L以上的流水池中培育,平均驯养成活率49.4%,获成熟亲鱼234尾次;共催产亲鱼224尾次,产卵雌鱼133尾次,总产卵量127.3万粒,平均每尾雌鱼产卵0.957万粒;获受精卵93.8万粒,平均受精率为73.7%;受精卵在水温12.5~14.0℃的流水孵化槽中孵化199 h开始出膜,共孵出幼体85.5万粒,平均孵化率91.2%;共获2 cm仔鱼55.1万尾,平均出苗率58.7%;共获3.5 cm鱼苗45.2万尾,鱼苗培育成活率为82.0%。     

稳态工况下横摆角速度与侧倾角的关系分析

在分别建立转向、悬架和轮胎数学模型的基础上,理论推导出横摆角速度与侧倾角的相互关系,分析了角阶跃输入下路面附着系数和车速对转向的影响,刻画了不同车速和前轮转角下横摆角速度与侧倾角的变化过程,通过分析总结出两者之间的稳态值变化规律。仿真和试验结果表明,试验与仿真的结果相吻合,验证了仿真的正确性,为侧向和垂向动力学的集成控制研究提供了理论参考。     

基于2DVD的非旋转折射式喷头水滴直径分布规律

采用基于三维视频粒子测量原理的视频雨滴谱仪(Two-dimensional video disdrometer,2DVD)对喷灌机中常用的Nelson D3000型喷头在多个工作压力下水滴直径沿射程的分布进行了测量,分析了水滴直径沿射程的变化趋势及水滴速度、水滴角度与水滴直径之间的关系。结果表明:水滴直径与射程符合指数函数关系,在距离喷头相同测点处,水滴直径随工作压力的升高而减小,而射程末端的水滴直径随着压力的升高而增大;水滴速度随水滴直径增加而增大,两者呈对数关系;水滴落地时与地面夹角(简称水滴角度)随水滴直径增加呈减小趋势,水滴直径小于1.0 mm时,50、100、150和200 kPa工作压力下,与地面夹角为90°的水滴个数占总水滴数的比值分别为90.46%、84.46%、89.91%和89.15%,其余水滴与地面夹角在30°~89°之间,水滴直径在1.0~2.25 mm范围内,水滴角度随水滴直径的增加迅速减小,水滴直径大于2.25 mm时减小趋势变缓,4个工作压力下最大直径水滴落地时与地面夹角平均值为45°;工作压力对于水滴直径与速度、水滴直径与角度之间的关系影响较小。     

不同刈割期秧草收割物悬浮速度的测定与分析

为了获取秧草收割物的悬浮速度参数,采用DFPF-25型悬浮速度试验装置对结荚期、初花期和分枝期秧草收割物主要成分的悬浮速度进行测定,并采用对比试验分析了叶子和茎秆对悬浮速度的影响。结果表明,3个时期的收割物对应成分的悬浮速度中,结荚期最大,初花期次之,分枝期最小;3个时期的最大悬浮速度依次为4.238、3.736和2.653 m·s-1;同一时期的各成分间的悬浮速度有重叠,表明收割物的飞行系数相近,气流较难将其分离,说明气流分选不可行。对比试验表明,去叶前后秧草收割物的悬浮速度变化率与叶子质量占比的比值为1.225~3.745,说明叶子对收割物的悬浮速度的影响比茎秆对悬浮速度的影响大。该研究结果可为秧草收获机的收集装置和分选装置的设计提供参考和依据。     

Sap flow of Castanopsis jianfengensis and its relationship with environmental factors in a tropical montane rainforest

Using thermal dissipation and the ICT-2000TE equipment made in Australia, the sap flow of Castanopsis jianfengensis and various environmental factors were measured simultaneously in a mixed tropical montane rainforest at Jianfengling Nature Forest Reserve (18°369′N, 108°52′E, 860 m elevation) during the dry and rainy seasons of 2002. The results show that sap flow velocity of C. jianfengensis exhibited a monopeak pattern on clear days and a multi-peak pattern on cloudy or rainy days. Sap flow velocity had significant positive correlations with solar radiation, air temperature, vapor pressure deficit and wind speed and a negative correlation with air relative humidity. In the dry season, sap flow velocity had a significant positive correlation with soil temperature and poor correlation with soil moisture; it was the opposite in the rainy season, indicating that precipitation clearly affected sap flow. Linear regression models between sap flow and environmental factors were established and were significant at the 0.005 level of probability. The mean transpiration rates of C. jianfengensis were 103.5 and 41.3 kg/d in our single tree and 1.94 and 0.77 mm/d in stand level in the dry and rainy season, respectively. __________ Translated from the Chinese Journal of Applied Ecology, 2007, 18(4): 742–748 [译自:应用生态学报]     

九龙山西沙湾围涂工程对邻近水域的影响

规划的西沙湾围涂工程位于杭州湾北岸,该水域岛礁林立、沟壑丛生,水流流态异常复杂,且工程上下游有陈山码头等众多重大涉水工程,使得该工程的敏感性凸显,通过平面二维数学模型研究了围涂工程对邻近水域的影响,为相关部门的审批提供决策依据。     

The occurrence of summer mastitis in Jutland (Denmark) in relation to meteorological factors

Data for incidence of summer mastitis in 14 veterinary practices in Jutland (Denmark) were related to meteorological factors using statistical methods. A correlation and regression analysis showed that summer mastitis occurred earlier in years with high temperature and precipitation in early summer. The annual number of cases markedly increased over the years 1953 to 1980. This increase was described by applying a linear increase with with year to a logarithmic transformation of the annual incidence.Analysis of 10-day incidences from the veterinary practices and daily incidence from a test site at St. Vildmose (Jutland) showed that incidence of summer mastitis could be related to temperature and wind velocity within the previous 10 days. High temperature and low wind velocity in this period increase the incidence. This indicates that the incubation period of summer mastitis is at maximum about 10 days. The activity of the fly (Hydrotaea irritans Fall), which acts as mechanical vector for the bacteria is influenced by temperature and wind velocity. This may explain the variation in incidence of summer mastitis during the season and from year to year.     

Effects of Vegetation Stems on Hydraulics of Overland Flow Under Varying Water Discharges

Vegetation plays an important role in soil erosion control, but few studies have been performed to quantify the effects of vegetation stems on hydraulics of overland flow. Laboratory flume experiments were conducted to investigate the potential effects of vegetation stems on Reynolds number, Froude number, flow velocity and hydraulic resistance of silt‐laden overland flow. Cylinders with diameter D of 2·0, 3·2 and 4·0 × 10⁻² m were glued onto the flume bed to simulate the vegetation stems, and a bare slope was used as control. The flow discharge varied from 0·5 to 1·5 × 10⁻³ m³ s⁻¹ and slope gradient was 9°. Results showed that Reynolds number on vegetated slope was significantly higher than that on bare slope because of the effect of vegetation stems on effective flow width. All the flows were supercritical flow, but Froude number decreased as D increased, implying a decrease in runoff ability to carry sediment. The mean flow velocity also decreased with D, while the velocity profile became steeper, and no significant differences were found in surface flow velocities among longitudinal sections on all slopes. Darcy–Weisbach friction coefficient increased with D, implying that the energy consumption of overland flow on hydraulic resistance increased. Reynolds number was not a unique predictor of hydraulic roughness on vegetated slopes. The total resistance on vegetated slopes was partitioned into grain resistance and vegetation resistance, and vegetation resistance accounted for almost 80% of the total resistance and was the dominant roughness element. Further studies are needed to extend and apply the insights obtained under controlled conditions to actual overland flow conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Maximum slat width for cooling efficiency of horticultural produce in wooden crates

The influence of wood package design on airflow distribution was investigated for forced-air cooling using horticultural produce simulators. The position of grooves on the container walls was tested using slat width of 100–200 mm and airflow rates ranging from 0.0005 to 0.003 m³ kg⁻¹ s⁻¹. The package opening configurations were compared based on their impact on the energy added to the system using a methodology previously developed. For this purpose, apples and sweet corns were taken as examples of produce from two different extremes in the respiration activity range. For airflow rates as low as 0.0005 m³ kg⁻¹ s⁻¹one groove at the bottom of the container produced a cooling process more uniform than the other one-groove configurations and even two grooves because of natural convection effect. If packing low respiration rate produce, increasing airflow rate could compromise the process energy efficiency because of air circulation obstruction for less vented containers. For high respiration rate produce enlarging open area above 2.4% would be recommended rather than increasing airflow rate to enhance cooling energy efficiency.